Premier One-Piece Drainable Pouch with FlexWear Skin Barrier & Microseal Closure & AF3000 Filter

How to Use Premier One-Piece Drainable Pouch with FlexWear Skin Barrier & Microseal Closure & AF3000 Filter

1. Clean the skin with water or with gentle soap as recommended by your healthcare professional. Rinse and dry thoroughly. Do not use oils, powder, lotion, or lotion-type soaps on the skin.
2. Measure the stoma using a stoma measuring guide before every barrier application. 
3. Trace the determined barrier size opening onto the skin barrier. The skin barrier should fit where the skin and stoma meet. Verify that no skin is showing between the skin barrier and the stoma to help prevent leakage and skin irritation.
4. Using small curved scissors, carefully cut an opening in the skin barrier to match the pattern. Do not cut beyond the line on the release liner. Do not puncture the pouch.
5. Remove the release liner from the skin barrier.
6. Center the skin barrier opening over the stoma.
7. Apply gentle pressure to the skin barrier for about a minute for best adhesion.
8. For tape-bordered barriers, remove the backing paper on both sides and gently press adhesive against skin.
9. Close the Lock ‘n Roll microseal closure at the bottom of the pouch. 
10. To remove: Carefully lift an edge of the adhesive and peel downward, gently pushing the skin away from the skin barrier. Properly dispose of used pouch. Do not flush down the toilet.